Thermoplastic paint is a polymer-based coating that melts when heated and hardens on cooling, forming a durable, reversible film. Used for road markings and industrial coatings, it includes resins, pigments, and additives, offering longevity and reflectivity.
 

Composition of Thermoplastic Paint

Resins (20-30%): Binders (e.g., polyethylene, alkyd) for adhesion and durability.
Glass Beads (10-30%): For reflectivity.
Pigments (5-10%): Titanium dioxide (white), organic pigments (colors).
Fillers (30-50%): Calcium carbonate, sand for bulk and anti-skid.
Additives (1-5%): Plasticizers, UV stabilizers for flexibility and longevity.

Application Methods
Hot-Applied: Powdered thermoplastic is heated to ~200°C (392°F) in a kettle and applied via spray, screed, or extrusion for road markings.
Preformed Thermoplastic: Pre-cut shapes (e.g., arrows, letters) are heated with a torch or heat gun and bonded to surfaces, ideal for symbols or small areas.
Liquid Thermoplastic: Cold-applied, waterborne versions are sprayed for easier application, though less common.
Surface Prep: Surfaces must be clean, dry, and sometimes primed (e.g., for concrete or old asphalt) to ensure adhesion.

Key Advantages for Applications
Durability: Lasts 4-10 times longer than traditional paints, reducing maintenance costs.
Reflectivity: Glass beads enhance night and wet-weather visibility.
Anti-Skid: Additives improve traction, critical for pedestrian and vehicle safety.
Fast-Drying: Sets in minutes, ideal for high-traffic areas.
Eco-Friendly Options: Low-VOC or recyclable formulations available.

Applications of Thermoplastic Paint

Road Markings: Durable, reflective lines for highways, intersections, and cycle paths.
Car Parks: Parking bays, arrows, and safety zones with long-lasting designs.
Playgrounds: Colorful, anti-skid patterns for games and educational markings.
Airfields: Runway and taxiway lines resistant to jet fuel and weather.
Industrial Sites: Warehouse aisles, hazard zones, and safety markings.
Urban Areas: Decorative streetscapes, bike lanes, and traffic calming markings.
Special Uses: Marine coatings or temporary event markings.

Technical Specification

Density(g/cm3)	1.8-2.3
Softening point (℃)	90-125
Compressive Strength(MPa)	≥12
Glass bead content(%)	0-30%
Liquidity	35±10
Packing	25kg/bag
Color	White/Yellow/Blue/Red/Green/Customized
Executive standard	JT/T280-2004/AASHTO/BS3262/Customized
Appearance	Powder
Construction temperature	180℃-220℃
Whiteness	70-85(Customized)
Inverse coefficient	50-550
Warranty	12 months
Storage Method	Avoid light and moisture
Packing Size	45×70×5CM

Long-Lasting and Reflective Thermoplastic Paint for Road Markings and Industrial Coatings

Inquiry Cart 0

Home Products Suppliers About Us Contact Us Help Site Map 公司介绍联系我们

Français Русский язык Español 日本語 Português

China Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0~9